MIVISION TECHNOLOGY CO.,LTD
|
Payment Terms: | T/T |
Place of Origin: | Guangdong, China (Mainland) |
Add to My Favorites | |
HiSupplier Escrow |
A:Safety Precautions
1.Read the manual before installation and operation, and strictly comply with the security provisions
2.Compliance with the product manual warnings
3.Attachments recommended by the manufacturer, or may cause dangerous
4.Do not place the product unstable, prone to falling, causing personal injury and product damage
5.Be careful not to pull hard wire installation, in order to avoid dangerous
6.Need professional installation personnel to operate and maintain
7.This product is a special equipment, such as the failure should be professionals or manufacturer's technical staff maintenance
8.Vehicle washing, avoid the water from the side Watch this product
9.The supply voltage DC 12V car power supply, not other power
B:Product Introduction
With the continuous development of the CCTV system, more and more surveillance products tend to be professional, intelligent, integrated, and make it more widely used in all walks of life 3G car mobile monitoring emergency command system is to meet the national defense,public security, flood control, Home rescue, handling emergencies, financial escorts, urban management industry monitoring product design. It has 3G wireless remote audio and video transmission capabilities, GPS location and tracking features, car display video features, the car wired, wireless remote PTZ function.Have the characteristics of professional vehicle equipment, anti-vibration, impact, suitable for harsh environment, high reliability, installation easy and simple.
C:Features
1.Remote 3G wireless video transmission.
2. Two-way voice intercom.
3. Car display, SD card recording, dedicated remote control PTZ and lens control.
4. GPS location, tracking.
5. Unique mechanical structure design, superior cushioning. Precision drive, smooth operation, high reliability. Super self-locking, impact resistance.
6. Sucker fixed speed speeds below 50km / h. (Sucker and roof installation required to maintain the roof flat, dry-cleaning and require inspection before each trip)
7.Speed greater than 50 km / h, using fixed installation (optional roof bracket).
8. car with a remote control of PTZ and lens control (within 100 meters of unobstructed).
9. 3.7V-24VDC wide voltage DC power supply.
D:technical indicators
Project | parameters |
Wireless transmission | 3G real-time video transmission |
Audio features | Wireless remote two-way intercom |
Car video | Local recording SD card, maximum support 32G |
Local display | Car handheld LCD Sun Visor LCD |
Global Positioning | Built-in GPS receiver module |
Power supply | DC12V 3A |
Power consumption | 30W |
Impact absorbing way | soft |
Image Sensor | SONY 480TVL |
Rotation angle | horizontal displacement:360 vertical :15~90 |
Rotation speed (constant velocity) | horizontal displacement:20degrees / sec;vertical :degrees / sec. |
Rotation speed (variable speed) | horizontal displacement : 0.1 to 60 degrees / sec; vertical :0.1-40 degrees / sec. |
Preset | optional |
Communication protocol | PELCO D/PELCO P |
Baud Rate | 9600 |
Working environment | -1055Heated-3555 |
Material | All metal construction, aluminum alloy shell |
Installation | Sucker, bolts (optional) |
Control equipment | Remote control or RS485 keyboard (optional other keyboard) |
LED | 60MOptional |
Wipers | Optional |
Weight | 4.75 kg |
Remote control | 433MH2 Wireless control within 100 meters (unobstructed) |
E:Common Faults
Problem phenomenon | Possible Cause | Repair Countermeasure |
Energized, not automatically detected, no image | Power lines are wrong | Rewiring |
Damage to the power | Replace the power | |
Self-test cannot be carried out or noise | Power is not enough | Replacing the power supply to meet the requirements |
Mechanical failure | Need overhaul | |
Self-test for normal operation, but no picture | Bad connection | Rewiring |
Lines reversed | Rewiring | |
The self-test successfully but cannot operate | The control lines are wrong | Rewiring |
Baud rate or protocol selection error | Check the DIP switch | |
Remote control battery without electricity | Replacing the remote control battery | |
The environment electric field interference | Use the keyboard to control | |
Image is unstable | Bad connection | Rewiring |
Switch or circuit failure | Need overhaul | |
Local normal, but not remote monitoring | cdma arrears or does not match the operators | Consult your wcdma charges carriers |
Receiving server parameters not set correctly | Check the server IP address and port settings | |
No 3G signal for antenna connection is bad | Check the 3G antenna, phone confirmation signal |